Learn how to allow less secure apps to access your account by following Allowing less secure apps to access accounts. Also, turning off the security feature to enable this on your Gmail account.

If you're still getting the same issue, you can reach out to our QuickBooks Desktop Support to have this investigated. You can always get back to me if you need more help in setting up your email in QuickBooks.

I'll be around to help. No matter how I try to set up a NEW email address when it sends me to the intuit site, it tries to use an old intuit ID from 5 years ago. It will not accept the password.

I set up an app password in aol. When it does this , it also has the following text. How to use this app password 1. Go to the settings section of your app this would be the send forms - correct? Find the screen where you enter your AOL account username and password send forms never ask for a password so how can you do this? Copy the app password above and paste it into the password field there is no password field So , what is one to do? Welcome back ad thank you for adding some more details about this topic, SirFrank ,.

I can see that having to try performing several troubleshooting steps and not getting them work can be a real pain when you have more things to be doing. I know this has already taken much of your time, however, in order for us to review your QuickBooks log files to verify data and other underlying issues, we would need to pull up your account. As much as I would love to get this taken care personally, I am unable view confidential information and do a screen sharing session in this public forum.

Only our phone representatives have the tools to do this. Please update me on how the call goes. I am here if you need additional assistance with QuickBooks.

All the best! AT first you need to check your aol email as it is correct or not after which if it shows you that you may try to do contact a aol.

Thanks for the post. I am having the exact same issue with no luck in resolving. I even changed my password back to my old password. Still no luck in sending invoices. Any words of advice? Thank you so much!! Thank you for following the provided steps. You'll want to check with your email provider if they have changes on their security when other apps are accessing the email.

I have basically the same problem except for it is a Yahoo account. It happens once a day it seems. I have to go into my yahoo security and generate a 16 digit password, copy and paste it and then the email sends.

The next day I come back and have to do it again! Can I make it so I just have to enter it once? At this time, I encourage reaching out to your email provider so they can review why you aren't able to send email without going to the yahoo security and generate the password from there.

Also, you can reach out to our Support Team so a representative can take look into this further on the QuickBooks end. To contact support, check out the steps laid out in this article. Get back to me if there's anything you need assistance with.

I'm a few clicks away to help. Have a good day! I've had same problem with gmail. And sending through WebMail. I have input every password ever used. After so much frustration I just save as pdf and send via my own email.

QB, thanks for nothing. Here is it step by step since FEB It will bring up a new page. On the far left click on Account Security. It might make you "sing-in" and give your current email password, that is okay.

If Quickbooks as not already be generated as an app then scroll down the list and click on Other App. Type in the word "Quickbooks" in the box that reads "Enter custom name". Click Generate.

If you still see an error, move on to Step 4. This step may be difficult. If you're a confident computer user, continue with the steps below.

Otherwise, reach out to an IT professional for help. Send a test email. There may be an issue with your Outlook or Office Suite.

If you still see an error and the repair didn't work, move on to Step 5. Follow the steps to install QuickBooks Desktop again.

If you still see an error, you may want to reach out to Microsoft directly or an IT professional for help fixing Microsoft Outlook. QuickBooksHelp Intuit. Learn what to do if you see error messages about Outlook in QuickBooks Desktop. For help, contact Right Networks. Step 1: Edit your admin privileges Make sure QuickBooks isn't set to automatically run as an administrator. Close QuickBooks Desktop. Open the Windows Start menu. Type "QuickBooks" into the search. Then right-click the QuickBooks icon and select Open file location.

In the folder, right-click the QuickBooks. Select the Compatibility tab. Select to uncheck the Run this program as Administrator option. If the option is grayed out, select Show Settings for All Users. Outlook IS installed on my system and is working fine by itself. Same problem. Hi there, agrozier. I appreciate you for sharing the information on how you resolved the issue about being unable to send an invoice by Comcast email. This resolution will surely help other users who encounter the same problem.

Please know that you're always welcome to post again if you have any other concerns with your QuickBooks. The Community team will always here to help. Wishing you and your business continued success. If the Outlook is web-installed, "sometimes" QuickBooks will not recognize it.

In that event, configure the sender s email address and password with the third option "Add". I too am unable to email invoices through Quickbooks. This always worked but recently is not working.

I use Office and the desktop Quickbooks Pro. I haven't changed or done anything different to this computer. Please help. Welcome to the Community. I'm here to lend a hand with your concern about emailing invoices in QuickBooks Desktop.

Our QuickBooks system is currently compatible with the Office program as long as you install it locally on your computer. Before you perform any troubleshooting steps, let's also make sure you have the latest release to ensure you have all the new updates and features.

For more insights into the list of supported software, you can check the system requirements through this article:. System requirements for QuickBooks and Enterprise Solutions If you're still unable to email within QuickBooks, you can also run a repair for the Office program.

For your guidance, please visit this support link:. Repair an Office application. In case all fails, I recommend reaching out to our Support Specialists this time. They'll be able to check further why you're unable to send them over since there are no changes made from your end. Let me know if you need anything from regarding the software compatibility. I'm always up to lend a hand.

For the past few days it has not been possible to send forms from QuickBooks. I use a gmail account that is correctly stored in QuickBooks and I have been sending reports and invoices from QuickBooks for years - except when it needs to be adjusted again like here!

This app has not been verified yet by Google in order to use Google Sign In. Currently, we have an on-going issue where users, like you, received the error message saying " Sign in with Google temporarily disabled for this app.

This app has not been verified yet by Google in order to use Google Sign In " when sending your transactions. Rest assured that we have already informed our product engineers and they're working to fix this as soon as possible. If you haven't yet, you may need to perform some troubleshooting steps so you can get back on track in sending your transactions. In addition, I'd recommend contacting our Customer Care Support. This way, you'll be added to the list of affected users.

To do so:. Once you've been added to the list, you'll receive all available updates about this issue through your email. In case you need some related articles in managing your transactions, you can visit our Income and Expenses page for reference. We appreciate your patience while we're working on this. Please let me know in the comments section down below if you have any other concerns.

I too am getting this password issue out of nowhere now, although I use G-mail for all my invoices. I have double checked my password and it continues to say that it is not correct. This is highly aggrivating since I have invoices to send immediately.

Please help - [email address removed]. Thanks for joining this thread, Sonny. The investigation about the error when sending an invoice by email is still in progress. Since you've already tried all the troubleshooting steps recommended by my colleague JonpriL, I suggest contacting our QuickBooks Care Team if you haven't.

They can add your company details to the list of affected users and get notified via email for the updates of the investigation. Instructions on how to reach us are provided above. You can also have this investigation number INV as your reference. We'll be also updating this thread once we receive progress of the current investigation. Feel free to reach back to me if there's anything else you need to know about QuickBooks. Have a wonderful day ahead! I am Also un able to send emails thru quickbooks wrong password but it is the right password.

PLease help. At this time, the issue of sending emails through QuickBooks is still on-going. Rest assured that our product engineers diligently working for a fix. As a workaround, you can follow the troubleshooting steps shared by my colleague JonpriL to fix the password issue.

To ensure you'll get an update about the resolution status, I recommend reaching out to our Customer Support Team again. They have to collect personal data to add your company to the list of affected users and provide this investigation number for easy tracking: INV If you have any other questions, feel free to comment below. Thank you for your patience while we're working on this.

I am unable to send emails through the "Exchange Accounts" only. I receive the error message attached 2 times. One for each Exchange Account. I did the following so please do not suggest again.

The only thing that works is creating a new profile and not including the Office Exchange Accounts. I created a profile with a gmail account and it works. Thanks for joining us here in the Community, SoftwareTeacher. To help verify why you're unable to send emails through the Microsoft Exchange Account, I recommend contacting the Customer Support Team.

This way, they'll be able to check the account setup and determine the root cause of this issue, since you already tried some troubleshooting steps.

Grinders, Buffers, Lathes. All News. ABB Apprentices Join the Next Generation of Manufacturers External article As manufacturers work to fill the skills gap and hire more employees, some are modernizing a tried-and-true approach: taking on apprentices. In Fort Smith, Arkansas, ABB—an industrial electric motor and robotics manufacturer—is leading the way with its innovative program for local high school students.

Investing smartly in the next generation of manufacturers While college or military is the right pathway for some high school students, technical career paths may be more aligned to the interests and aptitudes of others. Studies done in our local communitites indicate many students have the aptitude for careers in manufacturing, but most don't have the interest.

The STEP Ahead Award honors women who have demonstrated excellence and leadership in their careers and represent all levels of the manufacturing industry, from the factory-floor to the C-suite. Do not use excessive force Non stock Average Weight Approx. Millimeter Bore Inch Bore Bushing Stock Bore Range Maximum Standard Shallow Minimum Keyway Keyway Important — The metric system does not refer to keyseat or keyway dimensions as does the English system; instead dimensions are given for the key itself which is rectangular in shape, not square as in the English system.

Match the hole pattern, not the threaded holes each hole will be threaded on one side only. Thread set or cap screws into those half threaded holes indicated by O on above diagram. Mount assembly on shaft. On and larger For detail dimensions required for machining hubs, consult factory. M Key furnished for these sizes only. For general reference. Severe conditions may require larger hub.

Heavy well-located web Your most recent searches Delete. Match the hole pattern, not the threaded holes each hole will be threaded on one side only. Thread set or cap screws into those half threaded holes indicated by O on above diagram. Mount assembly on shaft. On and larger For detail dimensions required for machining hubs, consult factory.

M Key furnished for these sizes only. For general reference. Severe conditions may require larger hub. Heavy well-located web Your most recent searches Delete.

Frequent searches. Other sections. Bushings 16 Pages Add to favorites. Catalog excerpts. This site offers B2B distributor support and customer service for Maurey Manufacturing products. This site is a dedicated B2B service and supports our distribution network for inventory access and ordering as well as general information of our company and products.

We currently maintain seven local service centers located strategically throughout the U. We are frequently asked if "HQ" and "H" bushings can be interchanged. They can be used interchangeably.

I worked on several projects where line count was the core function of the software, and working as fast as possible with a huge number of files was of paramount importance. The second potential bottleneck is memory management: the more you load at once, the faster you can process, but this bottleneck is negligible compared to the first.

Hence, there are 3 major ways to reduce the processing time of a line count function, apart from tiny optimizations such as disabling gc collection and other micro-managing tricks:. By far, this is how you can get the biggest speed boosts. If you need variable length, you can always pad smaller lines. This way, you can calculate instantly the number of lines from the total filesize, which is much faster to access. Often, the best solution to a problem is to pre-process it so that it better fits your end purpose.

Then, you can expect to get a multiplier boost in proportion with the number of disks you have. If buying multiple disks is not an option for you, then parallelization likely won't help except if your disk has multiple reading headers like some professional-grade disks, but even then the disk's internal cache memory and PCB circuitry will likely be a bottleneck and prevent you from fully using all heads in parallel, plus you have to devise a specific code for this hard drive you'll use because you need to know the exact cluster mapping so that you store your files on clusters under different heads, and so that you can read them with different heads after.

Indeed, it's commonly known that sequential reading is almost always faster than random reading, and parallelization on a single disk will have a performance more similar to random reading than sequential reading you can test your hard drive speed in both aspects using CrystalDiskMark for example.

If none of those are an option, then you can only rely on micro-managing tricks to improve by a few percents the speed of your line counting function, but don't expect anything really significant. Rather, you can expect the time you'll spend tweaking will be disproportionated compared to the returns in speed improvement you'll see. Stack Overflow for Teams — Collaborate and share knowledge with a private group. Create a free Team What is Teams? Collectives on Stack Overflow.

Learn more. How to get line count of a large file cheaply in Python? Ask Question. Asked 12 years, 8 months ago. Active 1 month ago. Viewed 1. SilentGhost SilentGhost k 61 61 gold badges silver badges bronze badges.

Do you need exact line count or will an approximation suffice? Legend: I bet pico is thinking, get the file size with seek 0,2 or equiv , divide by approximate line length. You could read a few lines at the beginning to guess the average line length.

IanMackinnon Works for empty files, but you have to initialize i to 0 before the for-loop. Show 5 more comments. Active Oldest Votes. Kyle Kyle 7, 1 1 gold badge 15 15 silver badges 10 10 bronze badges. Is it required to 'close '? I think we cannot use 'with open ' in this short statement, right?

It's not any faster than the other solutions, see stackoverflow. Add a comment. You can't get any better than that. Yuval Adam Yuval Adam k 88 88 gold badges silver badges bronze badges. Exactly, even WC is reading through the file, but in C and it's probably pretty optimized.

Tomalak That's a red herring. While python and wc might be issuing the same syscalls, python has opcode dispatch overhead that wc doesn't have. You can approximate a line count by sampling. It can be thousands of times faster. Learn how your comment data is processed.

Related Posts. Leave a Comment Cancel Reply Your email address will not be published. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions. There must be something wrong in my code but I don't know fileinput enough to find it. Or is it a normal behaviour of fileinput.

If so, for a file very big, the size of the file may exceed the capacity of the RAM. I am not sure of this point: I tried to test with a file of 1,5 GB but it's rather long and I dropped this point for the moment. If this point is right, it constitutes an argument to use the other solution with enumerate. Messing around with a similar problem recently and came up with this class based solution. For example GollyJer GollyJer Coddy Coddy 3 3 silver badges 14 14 bronze badges.

Could you maybe elaborate on your answer a bit more? Actually I did but not sure why it missed out. Added again, thanks for reminding. Here is how I am implementing these options in my code. This does not provide an answer to the question. To critique or request clarification from an author, leave a comment below their post - you can always comment on your own posts, and once you have sufficient reputation you will be able to comment on any post.

Prune - thanks for the comment and I have included a code snippet from my learning to add clarity to what I was suggesting. Please note that "above" has no context among answers.

Answer votes change and answers can be sorted in a number of different ways. Better to link to the answer to which you are referring.

Sign up or log in Sign up using Google. Strengthen your foundations with the Python Programming Foundation Course and learn the basics. Previous Python program to copy odd lines of one file to other. Next Python - Get number of characters, words, spaces and lines in a file.

Recommended Articles. Python program to Count the Number of occurrences of a key-value pair in a text file. Article Contributed By :. Easy Normal Medium Hard Expert.

Writing code in comment?

Visit Developer Website. Parallels Desktop 8 for Mac. It also functions like the other Parallels Desktop version wherein it allows other operating systems to be run on MAC.

However, Parallels Desktop 8 is packed with more upgraded features such as improved multi-display configuration support including Retina, improved support for full screen in either single or multi-display configurations, as well as it has the ability to resolve issues related to Google Chrome Flash video playback, Coherence mode keyboard malfunctioning and fast moving mouse.

Parallels Desktop 8 also supports Mountain Lion as a guest OS as well as it also features notifications, Mountain Lion Dictation, Presentation Wizard, Multi-language Keyboard Sync, Reworked Keyboard shortcuts, Shared Bluetooth, DirectX 10 support, and a lot more features that contribute to providing users a great experience running multiple platforms and features that make the Parallels Desktop 8 more advanced than other versions.

VMware Fusion 4. VMware Fusion 4 VMware Fusion 4 is a version of the virtual machine software, Fusion, which is created by VMware exclusively for Mac computers, but only for those that have Intel processors. It can run different operating systems that are Intel based as well, which include Microsoft Windows, Linux, and NetWare or Solaris installed on virtual machines. It also works for Mac OS X operating system that uses a combination of hardware virtualization, para-virtualization and dynamic recompilation.

This program uses IntelTV which is found in the microarchitecture platform of Intel Core, with other technology features from the same company, like VMware Workstation, to have SMP and bit support included. Fusion 4 has the following distinctive features: updated user interface, optimization for Mac OS X version Google Chrome.

Google Chrome Google Chrome is a web browser that was developed by Google and is being offered for free. Webkit rendering engine is being used in order to display different web pages.

It allows its users to have the capability of creating shortcuts on their desktops which has the ability to launch different web applications using the browser. Users have the ability of installing different themes for Google Chrome which can be done by accessing option. Google Chrome was released in three different channels which are the Beta, Developer and Stable. A beta version was released for Android which allows its users to synchronize this with the ones that they have on their desktop in order for them to have the same browser tabs as well as bookmarks together with hardware acceleration and page pre-rendering.

An iOS version was also released for Apple devices. Microsoft Internet Explorer. It is a graphical web browser which is included as part of the different versions of Microsoft Windows operating systems. It is one of the commonly used browsers of most Windows users.

Since its first release in , different versions have come out, the latest one being the Internet Explorer It was designed in order to give its users the capability of viewing large range of web pages and at the same time be able to give its users features that can be used within the operating system that is installed on their computer which includes Microsoft Update.

Please let us know if you are aware of a different kind of. PVM file. These apps are known to open certain types of PVM files. Remember, different programs may use PVM files for different purposes, so you may need to try out a few of them to be able to open your specific file. Not sure exactly what type of file you are trying to open?

Try our new File Analyzer. It is a free tool that can identify more than 11, different kinds of files - most likely yours too! HDD File Viewer immediately opens.

NO size limitation of Software. Program Name:. System Requirements:. Operating System. Generic FAQs 1. What is the meaning of Virtual Box?

What is the use of Parallels Desktop? Is the Software free or has some hidden conditions? Can your software handle such a large file? Photo Video Manifest File 3. HP Photo Album. Parallels Desktop for Mac Verified by FileInfo.

Resolved my issue. Clear instructions. Easy to follow. No jargon. Pictures helped. Didn't match my screen. Incorrect instructions. Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information. Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies.

It is mandatory to procure user consent prior to running these cookies on your website. Thursday, January 13, Home Activation Keys. January 19, Share on Facebook Share on Twitter. Table of Contents. Next Post. Leave a Reply Cancel reply Your email address will not be published.

Write for us. Site Navigation. Google News. Technoroll Contact. Sorry, but you have to have something to work with.

Any chance you have the original reciept for the Office purchase? May 19, I have a Toshiba and I tried many of these serial for my windows Outlook My computer crashed and with my help I stripped all my software off of my computer. I will never find all the serials and passwords I had listed on a documents. My husband throws away boxes because they are taking up important space so I don't even have that. Office Basic. In the Sign in to set up Office screen, select I don't want to sign in or create an account it's a small link at the bottom of the window.

If you see a Let's get started screen with options to try, buy, or activate Office, this means that Office is installed on your new PC as a 1-month trial of Microsoft Family. You won't receive a product key from your PC manufacturer unless you paid for an Office product key card. Instead, you can start a trial of Microsoft Family, or buy Office. I thought this device included Office. If you paid for an Office product to be included on your new Windows 10 PC, a digital product key is transmitted to your PC when you activate Windows You won't receive a printed product key.

Instead, you'll see a message similar to the following when you start Word or any Office app. Get help with activating an Office purchase or free offer on a new PC. If you bought an Office product key card, you might need to carefully scratch off a silver foil coating on the back of your product key card to reveal your product key. If you damage the key while scratching off the foil coating, see I lost or damaged my product key.

Use your Microsoft account, not your product key, to install and activate Office and individually purchased Office apps, such as Project, Visio, Word, Excel, and Outlook.

If an Office app prompts you to activate, sign in with your Microsoft account instead of a product key. Find the account you use with Office. Note: If you bought a new, unused Microsoft product key card to renew an Microsoft subscription or to buy your trial, you can enter that product key if Office prompts you for it.

You can also enter the product key at www. To locate your product key online, see Get your HUP product key. If you're using a volume license version of Office Professional Plus at work, you'll need to contact your admin for a product key. For help, see Renew Microsoft for home. For help, see Activate Office. No, you don't. We can help if you forgot your Microsoft account or password. To learn how, see Change your Office product key. You can also switch your Office license if you buy a different version of Office.

To learn how, see Switch your Office license. No, your product key isn't displayed online see exception below. You should sign in using the Microsoft account that you used to buy and download this version of Office. For help, see Get your HUP product key. This is normal.

While these games are occasionally described as mindless, they tend to be fun to play even if they are not always all that deep. That is the difference between a hack and slash game and an action RPG. Dark Souls is an example of an action RPG because the player has to be more methodical and strategic about moves. Whether one agrees with that clarification or not, these are all great games regardless.

Diablo III might be an obvious pick but there is a reason this game has been active for nearly a decade. This is the ultimate hack and slash RPG that has near-endless hours of gameplay. Between replaying it with friends and going after new difficulties or classes, Diablo III is the gift that keeps on giving.

The combat system is addictive, accessible, and also allows for a solid amount of creativity and variety. This is, unfortunately, one of those cases of a celebrated game being trapped on the PS2. That is to say, it is a top-down hack and slash looter RPG. What made Champions of Norrath and its sequel so great in was that they were available on a console, something Diablo could not claim. This gem comes from Obsidian Entertainment, a studio that has proven great at highlighting the strengths of existing properties.

Square Enix acquired the rights for Dungeon Siege but only made use of the license. It was also buggy. That said, it is underrated, allows co-op, and can still be played via Xbox Backwards Compatibly. There are so many Dynasty Warrior games one could mention for this article.

It can be bought now for Windows, Mac, the PS3 and the Xbox , while a PS4 version is supposed to come out sometime next year as well. The Blades of Exile are the some of the most innovative and satisfying weapons ever to have graced video games, and God of War 3 provides you with bountiful opportunities to wield them hither and thither.

God of War 3 is available only for the PS3. The classic Ninja Gaiden series received one of its finest offerings in the form of Ninja Gaiden II which was released for the Xbox in This superb title has been blessed with an awesome combat system fraught with breathtaking scenarios and grand boss battles.

A spin-off to the legendary MGS series, this new PS3 and Xbox offering adopts a futuristic setting, and lets you perform all kinds of different maneuvers, combo attacks and counterattacks with your sword, even as you fight against cyborg enemies. A fruitful combination of action-RPG and hack and slash genres, Darksiders 2 is a heaven for fans of both types of games. It puts you in control of one of the four horsemen of the Apocalypse, and lets you experience various light and dark realms that are filled to the brim with rewarding quests.

Adopting ancient Japan as its setting, Onimusha: Dawn of Dreams tells the story through the perspective of Soki, a warrior who possesses Oni powers. Grand quests filled with rewarding puzzles also form part of the whole experience of Onimusha: Dawn of Dreams which is available only for the PS2. Equipped with a wonderful story and a dark setting, this title also presents you with some healthy platforming and challenging puzzles to solve.

Prince of Persia: The Two Thrones is pure fun laced with some amazing hack and slash combat that makes it hard to let go of your controllers. A high definition PS3 version can be purchased right now as well. Wii owners have this amazing hack and slash title which they can jump into.

Exactly like it. I'd play them, if only for that! It's hack and slash plus some shooter elements! Also hilarious!

Narnia - Prince Caspian - There's alot of sword swinging and bow flinging in this. Beowulf - Pretty cheap hardcopy - used - It's a hack and slash, but not the best. Genji Days of the Blade - I haven't played this one personally, but I'm looking forward to it! Blades of Time - Need I say more? Epic game! Hot chick MC too! Warhammer - Space Marine - It's good. Bleach - Soul Resureccion - It's bleach man. What more do you want? You want when in the plot? Diablo 3 - I'd recommend hunting down the ultimate evil edition.

I friggen LOVE this game to death, man. LOADS of fun! The lack of Splatterhouse in this topic depresses me. Lord of the Rings: War in the North!! Nice lists! More topics from this board PSN Shop games only! Tech Support 2 Answers What does the error code B mean? Tech Support 1 Answer Ps3 trouble power wont turn on? General 2 Answers How do I install games? General 2 Answers. Ask A Question.

Browse More Questions. Keep me logged in on this device. Forgot your username or password? Flamey 3 years ago 2 Darksiders series. Hamsters: Sandwich meat of the future.

Drethrake 3 years ago 7 nono's list says it all. I'm a Writer and also a Gamer. PS3 games better than their next-gen counterpart. Your Top 5 or 6!

Time crisis 2 is a lightgun masterpiece by namco which makes some of the greatest arcade games out there. Time crisis 2 on the arcade. Time crisis 2 sd arcade machine. Partner up with an ally or go solo as you engage in gunfights across many levels!

A game of epic proportions, released by arcade gaming giants, namco, arcade game rental presents time crisis 2! Manufactured by namco in It was then released on march, 20th in japan even if the title screen says The main new feature of the sequel is the cooperative two player mode. About time crisis 2 arcade game for hire.

This greatly improved on the first time crisis game, adding the second player option and more intense battles. Time crisis was a great shooter. Sequel to namco's shooting game with the innovative foot pedal that allowed the player to take cover and avoid gunfire. Time crisis 2 arcade machine. It set the standard that other time crisis games would follow. Sony PlayStation 4 1 Items 1. Not Specified 15 Items Game Name.

Time Crisis 3 76 Items Time Crisis 74 Items Time Crisis II 51 Items Gun 5 Items 5. Black 1 Items 1. Final Fantasy 1 Items 1. Medal of Honor 1 Items 1. Manual Included 66 Items Multiplayer 33 Items Complete Edition 27 Items Collector's Edition 12 Items Online Playability 8 Items 8.

Special Edition 8 Items 8. Demo 3 Items 3. Not Specified Items Region Code. PAL 64 Items Not Specified 65 Items Release Year. Brand New 13 Items Like New 13 Items Very Good 76 Items Good 92 Items Rather, it begs the following questions: What if you had a machine gun, and what if you could obliterate the shooting gallery itself?

The resulting game still feels pretty familiar, and perhaps isn't as challenging as any of the core Time Crisis games, but the pacing is faster, and it's pretty satisfying viscerally. It's a decent buzz, but with a limited number of levels and a decided lack of depth, it wears off pretty quickly. Now I have a machine gun. Ho, ho, ho. The players are different, but the scenario in Crisis Zone is pretty familiar--Cobra-style terrorists have taken over an urban complex consisting of a shopping center, a park, a hotel, and an office building, and a crack antiterrorist team, led by you, has to infiltrate the complex and shoot absolutely everything it can.

If you've played a light-gun game in the past six years or so, you've probably played a Time Crisis game--and so, in turn, picking up Crisis Zone shouldn't take long. You'll move automatically in the first-person perspective around a series of environments, plugging enemies as they pop up, run, slide, and jump into your field of vision.

Pressing an alternate button on the Guncon2 Namco's light-gun peripheral, which the game supports and basically requires for the right experience will cause you to duck down behind a riot shield, and will at the same time automatically reload your weapon. The riot shield concept is a new one, as the other Time Crisis games had you ducking behind whatever environmental cover you could find.

It seems to react a bit more quickly, which is a good thing, since the urban terrorists seem to be much better armed and much better shots than their Time Crisis cousins. The Crisis Zone thugs seem to be wearing much sturdier armor too, and can sustain a lot more damage before they'll go down, which is, of course, why you'll be packing a submachine gun rather than a simple handgun.

What this means on the mechanical level is that rather than squeeze the trigger every time you want to fire a round, you can just pull until you're out of ammo. This will certainly spell relief for those who are both light-gun game fans and carpal-tunnel sufferers. The submachine gun isn't quite as accurate, but its sheer firepower makes the action feel a lot more visceral, and you'll ultimately end up causing a lot more damage to the environments around you. The game actually encourages you to shoot up the joint a bit by awarding you combo points for shooting enemies and anything else that's destructible, and the sets are pretty well filled with destructible items, ranging from racks of CDs to room-filling pieces of scientific equipment.

I'm not sure about your error, but for converting. It will convert just about any file format to DVD, and burns it, all in one program. Plus it's really easy to use. I'll look into the error you're getting with Nero; I also use Nero6 all the time, and never really have any trouble with it either, but I'll see if I can help You must log in or sign up to reply here. Show Ignored Content. Make sure that data connection and power cables are connected properly.

Open Computer Management and, in Device Manager , verify that the library is displayed. Remove the tape from the library autoloader.

Consult the documentation for your hardware for instructions on troubleshooting tape errors. When the tape is repaired, run the library job again. In the Management task area, on the Libraries tab, select the library, and then, in the Actions pane, select Rescan. Change the cleaning tape, and in the Management task area, on the Libraries tab, in the Actions pane, select the drive, and then select Clean.

Contact product support for your hardware to have the drive serviced. You should also review all protection groups to identify if the absence of this drive requires changes to drive allocations. In the Management task area, select the Libraries tab, and then, in the Actions pane, select Inventory library to run an inventory. Operation cannot be performed because DPM Administrator Console is not synchronized with the actual state of the library.

Close and then reopen DPM Administrator Console to synchronize it with the actual state of the library. Use the front panel of your library to move the tape from its current location to the slot specified above. In the Management task area, select the Libraries tab, and then, in the Actions pane, select Inventory library. Make sure that there are no pending alerts for the library. Remove the tapes from the library. Clear duplicate barcode information from DPM. Replace the barcodes on the tapes and then insert them back into the library.

Inventory the library. In the Management task area, on the Libraries tab, select Inventory library , and then select the option to perform a detailed inventory. It is likely that your data spans multiple tapes and the catalog information is present on another tape.

Insert all tapes associated with the backup, and then retry the operation. Check for any Free tape threshold reached alerts generated by the libraries. If such alerts are present, proceed to step 3. In the DPM Administrator Console, select Management on the navigation bar, select the Libraries tab, and then do the following: Expand all library slots and check for any free or expired tapes.

If there is none, proceed to step 3. Check for any suspect tapes in the library. If suspect tapes are present, see Managing Suspect Tapes. Insert new tapes into the library, and then run a Fast inventory action followed by an Identify unknown tapes action.

In DPM Administrator Console, select Management on the navigation bar, select the Libraries tab, and make sure that the new tapes appear as free. Then, select Monitoring on the navigation bar, select the Alerts tab, and restart the failed jobs.

DPM could not reserve the drive resource because one of required drive resources is not online or it needs cleaning or servicing.

View and resolve all alerts for the library and its drive s. After resolving the alerts, retry the operation. In the Management task area, select the Libraries tab, and then, in the Actions pane, select Rescan. After the rescan operation has completed successfully, retry the operation. View and resolve all alerts for the library and drive, or wait for the other operations to complete.

Retry the operation after resolving the alerts. Either there is no drive online or all the drives need cleaning or servicing. In the Monitoring task area, on the Alerts tab, resolve all alerts for this library and its drive. After resolving the alerts, retry this operation. If you have drives that are functioning correctly but that are currently being used, wait for the other operations to complete, and then retry this operation.

If this library is associated with an active protection group, modify the protection group to associate it with another library to prevent tape-related jobs from failing. If you want to use this library for your tape-related jobs, in the Management task area, on the Libraries tab, select this library, and then, in the Actions pane, select Enable library. Retry the failed tape backup job by using the alert in the Monitoring task area. If your copy failed because the tape backup job did not run at all, in the Protection task area, select Create recovery point - tape to create a short-term tape backup.

After successfully running the tape backup, retry the failed copy job by using the alert in the Monitoring task area. All encrypted backup jobs will fail after this time. If this certificate contains a private key, move this certificate to the DPM recovery certificates collection for recovering data in the future, and replace this certificate with a valid certificate in the DPM backup certificates collection to continue further backups. If this certificate does not contain a private key, replace this certificate with a valid certificate in the DPM backup certificates collection to continue further backups.

To resolve this error, do the following: If this certificate contains a private key, move this certificate to the DPM recovery certificates collection for recovering data in future, and replace this certificate with a valid certificate in the DPM backup certificates collection to continue further backups.

See also Deploy protection groups. Check to see if there are any active alerts indicating suspect tapes. If such an alert exists, take the appropriate recommended action, and then retry this job. Use this tape on a DPM server that is authorized to read this tape. Add certificates to the DPM backup certificates collection. This is because DPM is not synchronized with the current state of the library.

In the Management task area, on the Libraries tab, select the library, and then select Inventory library. If enabled, select the Fast inventory option; otherwise, select the Detailed inventory option.

This may be because the data on this tape is corrupt. If you have another copy of this tape, use that to retry the recovery. If you do not have another copy of this tape, in the Recovery task area, select all required individual recoverable items, and then perform the recovery.

Hardware snapshots of the DPM replica and recovery point volumes are not mounted on the protected computer for SAN recovery. Use your SAN software to take hardware snapshots of the DPM replica and recovery point volumes, and to mount them on the protected computer. To resolve this error, do the following to erase the contents of the tape: In DPM Administrator Console, in the Management task area, select the Libraries tab, select the tape, and then click Erase tape.

After erasing the tape, DPM can use it for backups. In the Management task area, on the Libraries tab, select the library, and then, in the Actions pane, select Inventory library. Make sure that drives of this library are zoned properly. Make sure that all drive-related alerts for this library are resolved.

Make sure that the network connection to the computer hosting the global DPMDB database is properly configured. However, this tape is not marked as a cleaning tape. In the Management task area, on the Libraries tab, select this tape, and then select Mark as cleaning tape. The cleaning operation may have failed. If supported, check the front panel of your library to verify that this cleaning operation completed successfully. If the cleaning operation failed, try changing the cleaning tape, and then run the cleaning job again.

DPM is not synchronized with the current state of your library. In the Management task area, on the Libraries tab, select Inventory library. If available, select the Fast Inventory option, otherwise, select the Detailed Inventory option. In the Management task area, on the Libraries tab, select Inventory library to run inventory. If enabled, select the Fast inventory option. Otherwise, select the Detailed inventory option. This will update the library state as seen by DPM. Retry the operation after DPM has completed the inventory successfully.

This is possibly due to a hardware issue. If available, select the option to perform a fast inventory, otherwise, perform a detailed inventory. Check the SCSI and bus mappings of the drive to make sure that the drive is mapped correctly.

If you change any of the mappings, in the Management task area, on the Libraries tab, and then select Rescan. Check for loose connections of data or power channels. Make sure that the library appears in Device Manager. Make sure that the door on the library is closed. Refer to your hardware manual for other troubleshooting steps. If the drive is being serviced, you can ignore this alert. Make sure that the drive is powered on.

Make sure that the drive is connected properly. In Device Manager, if the drive is not enabled or is not visible, refer to your hardware manual for other troubleshooting steps.

If it is, in the Management task area, select the Libraries tab, select this tape, and then, in the Actions pane, select Mark as cleaning tape.

Examine the front panel of your library to see if any errors are being reported by your library. This could be a problem with your drive or tape. Select this tape and select Identify unknown tape. If this operation fails, it indicates a potential problem with your tape. Load the tape in the other library, select this tape, and select Identify unknown tape.

On the Libraries tab in the Management task area, select Rescan in the Actions pane. Check for loose data or power channel connections.

Make sure the library is visible in Device Manager. The drive will not be used for further operations until it has been cleaned. If you are seeing this error frequently, service the drive. Tape might not be properly inserted in the stand-alone drive or the stand-alone drive is not ready. Check to see if the tape has been inserted correctly into the drive. Check to see that the drive is ready and operational. Rescan failed because the tape drive or library hardware does not seem to have been set up correctly.

In Device Manager, check to see that the drivers for the tape drive or library hardware are installed correctly. Determine if any other process on the DPM server is currently using the library. If this is the case, stop the process. Check to see that your library is powered up and functional. The information in this file is not formatted correctly.

To update the library state, perform an inventory, and then retry the operation. Verify that the tape and the drive type are compatible and that the drive is supported. Also find out if you need to upgrade the drive firmware. This may be because the tape data is corrupt. If you have another copy of this tape, use that instead for the recatalog operation.

If this is the only copy of the tape and you want to recover as much data as is possible: 1. On the Libraries tab in the Management task area, select the tape. Select View contents. Copy the contents of this tape to disk. If it fails consistently, remove the protected data from the protection group and reprotect it again. Increase the disk allocation space for the recovery point volume, or delete old recovery points by using the Remove-RecoveryPoint cmdlet.

In these cases follow these steps: 1. In the Modify disk allocation dialog, identify the volume that corresponds to the recovery point volume for the data source. Select Disk Management , then right-click the custom volume. Select Extend Volume. To validate exclusion or inclusion filters for the data source, select Modify Protection Group.

After you modify the protection group, select the link below it to run a synchronization job with a consistency check. If the problem persists, the recovery point may be corrupt. Retry recovery from another recovery point.

To delete the change journal, at a command prompt run: fsutil usn deletejournal For more information, see the command usage. On the Exchange server, set the Overwrite database flag and retry the operation. The volume for one of the specified database file locations does not exist. Check to see that the volumes for all file locations specified are available on the destination SQL server.

Future backups will also fail until this issue is fixed. If your recovery point volume is offline, bring it online and then run consistency check for the affected data sources. If your recovery point volume is not available to bring online, remove the affected members from protection and reprotect them. When stopping protection for the affected members, select the option to delete the replica on disk.

Protection for this data source will fail to prevent existing recovery points from being deleted before their expiration. Verify that there are no pending recovery point volume threshold alerts active for this data source and rerun the job.

Future backups are also likely to fail until this issue is fixed. Rerun the consistency check and see if it resolves this issue. Check to see if your disks are connected properly to the DPM server. If there are any disk cabling issues, correct them and then run a consistency check.

If you are certain that you do not have any disk cabling issues, clear the VSS fault. If running a consistency check does not resolve this issue, increase the page file size on the DPM server and then run the consistency check job. Check the volsnap events in the Windows Event Log. Check the Event Viewer entries to determine the cause. After you correct the issue, retry the operation.

If the problem persists, contact your network administrator to diagnose possible network issues. All future backups will fail until this is resolved. Use a different DPM server to protect this datasource.

Download and install the latest driver and firmware updates from the tape drive vendor. Many tape drive vendors also offer utilities that you can use to diagnose hardware problems. Clean and service the tape drive. Update the library state by performing an inventory, and then retry the operation. On the Libraries tab in the Management task area, select Inventory library.

Check that the tape and the drive type are compatible, and the drive is supported. Also check if the drive firmware needs an upgrade. Share this folder out as a share called temp. Use another copy of the tape and retry the operation.

You can view the contents of the tape to confirm that it contains the expected data. DPM failed to recatalog the contents of the tape because it encountered a critical error while attempting to read catalog information from this tape.

If this is the only copy of the tape and you want to recover as much data as possible, then select this tape on the Libraries tab in the Management task area, click View contents , and copy the contents of this tape to disk.

DPM has encountered a critical internal error. Either it was already in a bad state or it entered a bad state during the current operation. Make sure that the required licenses are installed on the server, and then retry the backup.

This can also occur if you are attempting to back up a virtual machine and the VHD file is located in the root of a CSV. To work around this issue, create a folder and move the VHD inside the folder.

Depending on which situation you were in when you encountered this error, the following sections describe how to resolve this error. Volume Shadow Copy Service VSS error on a virtual machine To resolve this error in this situation, take one or more of the following actions: Make sure that the version of the Integration Components package on the virtual machine is up to date.

On the host for the virtual machine, open Server Manager , expand Roles , select Hyper-V , and then in the Events list in the Summary area, look for a warning that the Integration Components package must be updated. Make sure that all the writers on the virtual machine are in a stable state.

On the virtual machine, open an elevated Command Prompt window, type vssadmin list writers , and then press Enter. Make sure that there are no unresolved VSS errors on the virtual machine. Resolve any VSS errors that you find. Expand Diagnostics , expand Windows Logs , and then review the Application and System events for resolution steps. Expand Roles , select Hyper-V , and then, in the Summary area, review the Events list for resolution steps.

Creating a recovery point by using incremental backup for a computer that's running Exchange Server Circular logging might be enabled on this data source. DPM does not support incremental backups for a computer that's running Exchange Server on which Circular Logging is enabled.

To resolve this error in this situation, clear the Circular Logging check box, and then try to create the recovery point again. The next incremental backup fails when an incremental backup is performed after you run ntbackup on the storage group.

Create a DPM full recovery point before performing an incremental backup. This may have happened because the volume name is no longer valid. Increase the space allocated for the VSS diff area of volumes involved in protection on this server. If the problem persists, you can increase the change journal size or configure the current protection group to synchronize more often. To change the change journal size 1. Select Modify disk allocation , then select the Protected Server tab.

Select Modify and change the space allocated. To change the synchronization schedule: 1. Select the protection group in the Protection task area. In the Actions pane, select Modify protection group. To configure change journal size, select the Modify Disk Allocation link that appears below the alert window. On the Disk Allocation page, select Protected Server and select Modify , then change the space allocated.

Verify that there is at least MB of free space on the volume being protected. The change journal ID may have changed since the last synchronization. DPM is unable to track changes on this computer. File copy failed. Make sure that the source and destination locations exist and have Full Control permissions for the local system account.

Wait for the earlier backup job to finish, and then retry the backup. Or, you can cancel the current job, and then retry the backup job. DPM could not find a valid recovery point on disk. On the Jobs tab in the Monitoring task area, check for failures of synchronization jobs and resolve those. Next, create a valid recovery point and then run the backup to tape job again. To create a valid recovery point: 1.

For application data, in the Protection task area, select Create recovery point , and then select Express full backup on disk. For file data, in the Protection task area, select Create recovery point and then select Create a recovery point after synchronizing. The incremental backup job was cancelled because the associated full backup for the data source is not available or there is a newer version of the backup on which this job depends. This is a non-fatal error.

Another backup has been created at approximately the same time as this backup. Use the other backup for recovery. If you are backing up to tape, perform a full backup. If you are backing up to disk, perform an express full backup. On the Libraries tab in the Management task area, select the tape and then in the Actions pane, select View Contents. Verify that you do not have more than protectable data sources on a single volume.

If this is the case, check to see if you can split your data source across more volumes. Protection cannot continue. Check to see if you are protecting a clustered resource which has undergone a dirty failover. In this case, DPM requires a synchronization with consistency check before it can continue protection. To validate exclusion and inclusion filters for the data source, in the Protection task area, select Modify Protection Group.

If modifying the protection group does not start a consistency check, run a synchronization with consistency check. Synchronization will fail until the replica cleanup succeeds. This may happen if the replica volume is being accessed from outside of DPM. See the detailed error, resolve the issue with respect to the replica volume path, and retry the job.

Otherwise, DPM will synchronize with the changes during the next scheduled synchronization job. DPM has detected changes in file locations or volume configurations of protected objects since the data source was configured for protection. DPM detected that some protected objects are missing since it was configured for protection. In the Protection task area, select Modify Protection Group to update the configuration information for the data source on the DPM server and to increase the replica volume size if necessary.

DPM detected new protectable objects for the data source since it was configured for protection. DPM detected changes in existing protected objects and detected new protectable objects for the data source since it was configured for protection. A synchronization job with consistency check will be automatically triggered after 30 minutes. DPM tried to do a SQL log backup, either as part of a backup job or a recovery to latest point in time job.

All incremental backup jobs will fail until an express full backup runs. For backup failures If you see this failure as part of a backup job, in the Protection task area, select the SQL Server database, select Create recovery point , and then run an express full backup.

Alternately, you can wait for the next scheduled express full backup to run. For recovery failures If this failure occurs as part of a recovery job, then try to recover from another point in time. Make sure that this database is not already protected by another backup application.

After stopping the service, DPM was unable to successfully start the service. Check that the SQL Server service on the protected computer can be sent the start command successfully. After you ensure that the service can be successfully started, retry the recovery. If this error occurs again, try to recover the master database from another recovery point.

DPM was unable to successfully stop the service. Check that the SQL Server service on the protected computer can be sent the stop command successfully. After you ensure that the service can be successfully stopped, retry the recovery. Contact the Exchange Server admin. Verify the cause of failure from event logs entries on the Exchange server.

If you recently upgraded your Exchange server, copy them from that server to the DPM server. Contact your Exchange Server administrator, and then verify the issue. You can recover the last known good backup to address the corrupted state. Contact the Exchange Server administrator. Event logs on the Exchange server may help resolve the issue. Verify that the volumes are online and that the file system is in a consistent state.

If the volume is locked, unlock the volume and retry the operation. The alias of the user to which DPM has to connect the recovered mail box is online and connected to an Exchange server. If the replica has been marked inconsistent, run a consistency check on this data source.

Delete the change journal on the protected computer by using the FsUtil. Next, run a consistency check on the data source. This can cause backup or recovery jobs to fail. To fix this issue: 1. Change the location of the database log file so that its physical path is as short as possible. Run a consistency check job for this database. To troubleshoot this issue, verify the following: 1.

The database is online. The database is not in a restoring state. The database has not been deleted. The database is accessible. If the database was part of a mirroring session, either re-establish mirroring between the partner SQL Server databases or remove the database from protection and recreate the protection group for this database.

Protection jobs will fail until the recovery point volume is brought online. In the Protection task area, select Create recovery point-disk and select Create a recovery point by using express full backup. The data source is online. The data source is not in a restoring state. The application VSS writer is running. The data source is accessible. The data source is not missing.

If the data source is a member of a SharePoint farm, verify that it still exists in the SharePoint farm configuration. For more information on this error, go to Hyper-V Protection Issues. The recovery to the latest point in time failed. This tail log restore failed. You can do the following to fix the issue: 1.

Recovery to the latest point in time is not possible immediately after another recovery has been performed on the same database. Allow a synchronization job to run before you attempt a recovery to the latest point in time. Choose an alternate point in time to recover to, if you run into this problem repeatedly. The recovery to the latest point in time has failed.

This transaction log backup has failed. If the SQL Server log chain is broken, you will have to run a full backup to reinitialize the log chain 2. If the DPM replica for database is invalid, you will have to run a consistency check operation for this database.

Choose an alternate point in time to recover to, if transaction log backups cannot be successfully run against database. For more information, look at the SQL Server error logs. On the Exchange Administrator Console, set the Overwrite database flags for the databases being recovered and retry the operation. Check to see that no application running on this computer is malfunctioning to cause this high file system activity.

If you consistently run into this error, in the Protection task area, select Modify disk allocation. To increase the change journal size on the protected computer, on the Protected Computers tab, select Modify. File may be in use by some other application. In the Monitoring task area, resolve the Unable to configure protection alert for this data source, and then select the link that follows to retry the job. In the Recovery task area, select the recovery point prior to the latest recovery point.

In the Management task area of the DPM Administrator Console, on the Agents tab, enable the protection agent on the protected computer. Some data from this recovery point may contain partially synchronized data. Make sure that the pre-backup script finishes execution within the time specified, or increase the timeout period. Make sure that the post-backup script finishes execution within the time specified, or increase the timeout period.

Make sure that the pre-backup script or post-backup script configuration XML file does not have any errors and that the XML is well formed. Make sure that there are no pending recovery point volume threshold alerts that are active for this data source, and then rerun the job. Retry the operation and specify a storage group that is not a recovery storage group, or select the Recover to Recovery Storage Group option. In the Protection task area, create a recovery point for this database.

Scheduled consistency check will not be run on consistent replica. Provide an alternate name for the database to be recovered. Ensure that no database with the name you have specified already exists on the SQL server.

You will be unable to perform granular level recoveries from this recovery point. No action is required because the next scheduled full backup will synchronize the list of recoverable objects. Alternately, in the Protection task area, select the required protected object, click Create recovery point , and select the option to create a recovery point using a full backup.

If the error has been reported for your Exchange server, it indicates that the Exchange server backup files may be corrupt.

Follow these steps to resolve the issue: 1. Consult the Exchange server administrator to verify if the databases and logs on the Exchange server are in a good state. If the database and logs on the Exchange server are not corrupt, you need to run a synchronization with consistency check for this data source. In case the database and logs on the Exchange server are corrupt, you can choose to recover the Exchange data from the last known good backup.

Check to see that the post-snapshot step does not have any errors and can complete successfully. DPM failed to create the backup. If you are backing up only System State, verify if there is enough free space on the protected computer to store the System State backup.

On protected computers that are running Windows Server , verify that Windows Server Backup WSB is installed and that it is not performing any other backup or recovery task. You can see the errors reported by WSB in the event log on the protected computer. For resolution actions and more information on these errors, go to Backup Operations.

To resolve this error, do the following: If you use Windows Server Backup to back up a volume, do this only by using the Backup Once Wizard. If you use the Backup Schedule Wizard to perform scheduled backups, make sure that the volumes that are being protected by DPM do not contain application data such as Exchange Server mailbox stores or SQL Server databases. Reconfigure Windows Server Backup. Then, in DPM Administrator Console, in the Protection task area, select the volume, select Create recovery point , and then, in the Actions pane, select Express full backup.

This may cause the consistency check to fail. The bit version of eseutil. You can also choose not to run Eseutil consistency check for this protection group, by deselecting the Run Eseutil Consistency check option. This is not recommended because it will not ensure that the protected Exchange data can be recovered.

For more information on this error, see Hyper-V Protection Issues. Where are you located? There's an app called OpenSignal that is quite revealing for tower coverage. The unlock request can take up to two business days to process for devices not currently under a BoostUP! During that time, the following steps can help ensure the request processes properly:.

Tap UICC unlock for a settings refresh. And I've done a full factory reset now. My condolences. What a nuisance for you. I wish Boist was handling this network switchover more smartly.

If that doesn't work out, may be time to move on. They're cheaper, not sure they're smarter tech and customer support though. Still struggling with this issue.

Also related: stackoverflow. Add a comment. Active Oldest Votes. You can't get the function parameters this way. Evan Teran Too bad it is just the address. Here's an example implementation.

Jonathan Leffler k gold badges silver badges bronze badges. Abhijit Abhijit 58k 16 16 gold badges silver badges bronze badges.

This is quite cool :- It does work for me, but the particular program I'm using it on becomes extremely slow; it's been running for half an hour at the moment, while a normal run under GDB without the Python script takes a fraction of a second.

This program is quite a complex one, so I guess I shouldn't be too surprised, but the slowdown is definitely something to be aware of for people who might want to try this. Then, you just run the program: gdb run Once your program starts running, gdb will print the N topmost backtrace levels. Jorge Bellon Jorge Bellon 2, 10 10 silver badges 24 24 bronze badges.

Caleb Caleb k 19 19 gold badges silver badges bronze badges. The only problem is that i do NOT know how to set a breakpoint at the end of each function. You can break on a specific line number. Also, most decent IDE's make it simple to set breakpoints, usually by just clicking in the margin. You haven't said what tools you're using, so it's hard to give specific advice.

Or, can Eclipse CDT help generate the gdb command file? To summarize: debugger, log4cxx or AOP. Adam Miller Adam Miller 1, 1 1 gold badge 22 22 silver badges 44 44 bronze badges. Ah didn't know that. Yeah, that call grind looks like the best solution then — Adam Miller. Aside from missing the parameters which ehh I could live without. Works on Windows!!! SSpoke SSpoke 5, 9 9 gold badges 67 67 silver badges bronze badges. Sign up or log in Sign up using Google.

Sign up using Facebook. Sign up using Email and Password. Post as a guest Name. Email Required, but never shown. The local trace function should return a reference to itself or to another function for further tracing in that scope , or None to turn off tracing in that scope. Yet the C code seems very clearly to avoid chaining if the return value is None.

Returning None from a local trace function has no effect, and tracing continues anyway, in direct contradiction of the docs. So now I own Python issue to fix Created 4 May The heart of coverage. At the C level, there is no chaining, the trace function stored in the thread is always invoked. Implementing the Python level on the C level Naturally, the Python sys. An obvious goal for settrace and gettrace is that getting the trace function from gettrace and then passing it to settrace should be a no-op: This should be as if nothing happened: sys.

C trace functions To make program measurement faster, coverage. Your function will be invoked on calls, lines, and returns, and all is well.

Re-installable C trace functions To keep sys. After you execute sys. The last? Comments Sveder PM on 30 Jul Great post. Both answered my need for a simple example for a trace function to start exploring from, and had the indepth implementation details and interesting anecdotes.

Add a comment: Name:. Email: Ignore this:. Leave this empty:. Web site:. Name is required. Either email or web are required.

How do I trace C programs in Turbo C? Follow 5. First of all goto C drive then program files then turbo c folder then open bin folder and search what program u want. Comments Dislike Bookmark. It is divided in two parts: the first part is a tutorial that introduces you to the basic features of TDW and debugging techniques needed to debug a program; the second It is divided in two parts: the first part is a tutorial that introduces you to the basic features of TDW and debugging techniques needed to debug a program; the second part is a reference to the different debugging commands available in TDW.

The document assumes you have a basic knowledge of using Turbo C for Windows and programming in the C language. C to introduce you to TDW. As you read through this tutorial, you are advised to apply the techniques presented to the demo program.

This will enable you to gain a better understanding of the debugger and the debugging process in general. The program implements a primitive calculator that performs the basic arithmetic operations of addition, subtraction, multiplication and division on integers.

The program prompts the user for two integer numbers. It then performs the arithmetic operations on the numbers and prints out the result. Press F7 and checj. Press F7 to trace the program line-by-line. IN Turbo C Use f7 and f8 to trace the program. Related Questions. Dhruvil asked The object file is in binary code, and the machine understands the binary language. So why object files are not executed?

Noreen asked What is void main into main and what it does? Ishwari asked Give the structure of 'C' programming. Also, give significance of math. If we want to perform anything with another person, we can know the human language as a human being.

Similarly, if we want to perform anything with a computer, we It was developed to write the Unix operating Recommended Articles. Learn Microsoft Excel Microsoft Excel is an electronic spreadsheet tool which is commonly used for financial and statistical data processing. C Language Classes in Bangalore. C Language Classes in Hyderabad. C Language Classes in Delhi.

Here we can relax any edge to graph which obtained in iteration 4and we can observe that there is no chance to change those values. So we can confirm that there is no negative edge cycle in this graph. That structure contains 3 integers source, destination, weight of that edge. After creating Graph, choose a source node and send to BellmanFord function. After this we can store the result of shortest paths in an array. And we do one more relaxation to find whether there exists negative edge cycle or not.

If we got less distance at any node in Vth relaxation of edges, then we can say that the graph have negative edge cycle. Enter number of vertices in graph 5 Enter number of edges in graph 10 Enter your source vertex number 0. Vertex Distance from Source Vertex 0 0 1 2 2 7 3 4 4 These Algorithms are quite complex, maybe I need study and learn more to understand.

Thanks for sharing the article. Your program is wrong. Though it did work for small problems. Your email address will not be published.

Relaxing edge In algorithm and code below we use this term Relaxing edge. We will try our best to reach up to you in short interval. Thanks for reading the post…. Bellman Ford Algorithm The Bellman Ford algorithm is a graph search algorithm that finds the shortest path between a given source vertex and all other vertices in the graph. Notify of. For every pair i, j of source and destination vertices respectively, there are two possible cases.

How to modify Service Fabric replicator log size and also how to change Service Fabric Local cluster installtion directory or log directory. Continue reading. About the Author.

Specimen Collection. Basic Lab Safety Techniques. Introduction to Patient Medication. Medical Assistant Lab Classes:. Virtual Phlebotomy Lab. Virtual Injection Lab. Medication Injection Lab. Measuring and Taking a Pulse. Introduction to CPR.

Comprehensive Medical Assistant Exam:. All students must successfully complete the online exam at the end of the program. You will need to buy only one textbook book for this program:. This textbook contains everything you need for the program. It is also a great reference that will help you throughout your career! Program Textbook is available at:. Everyone else on my team plays an important role as well. Photo credits: m. If you inspire your people and praise your people, not being critical of your people.

This is easier said than done. Part of being a great leader is being able to inspire others to be great. As a leader, you need to get them to believe in themselves, and show that you believe in them.

Richard Branson has always been a people person. I love people. Love spending time with people. I love learning from people. In the early stages of my career, I used to be a control freak. I was a rugged individualist. Now, I have this amazing team, and I count on my people. This means that they can do certain things way better than I could. Richard Branson said that selling his record company for a billion dollars was a bit like selling his child. Richard Branson is so humble.

In , Branson received the Tony Jannus Award for his accomplishments in commercial air transportation. Branson sold the record company and invested the money into an airline. That was a smart business decision, even though it was extremely difficult for him to let go of his baby, Virgin Records.

The lesson is to be able to see a little further ahead. You want to sell in an up market. What if consumer behavior changes? What if the needs in the marketplace changes? For my organization, I think of things that could take us out of business or make us obsolete. I want to be there first. If anyone is the disruptor, then I want to be the disruptor. I want to reinvent my business model and put my old business out of business with a better one.

Blockbuster and Netflix are perfect examples of this. If they understood that they were in the entertainment business, and predicted what could disrupt their business. I remember watching a Richard Branson interview and hearing him explain the importance of delegation. He always said that a great entrepreneur is a great delegator. That way, you can use your time to think about the next big thing. You can use your time to be a visionary. An entrepreneur is not a manager. Rather, an entrepreneur is someone who is great at conceiving ideas, starting ideas, building ideas and then handing over to really good managers to manage the businesses.

I am not a micromanager, but rather, I am a visionary. I think of ideas, I come up with ideas, but I need implementers and managers to execute my vision. When they delegate, they have more time to innovate. Elon Musk is another influencer who believed in the power of innovation and creating new ideas. If you build a great team, and you delegate tasks, that gives you the freedom to spend more of your time thinking of the next big idea.

Richard Branson has over Virgin brands around the world. The brand is ultimately what Virgin is all about. A quick peek at his activity feed reveals a wide variety of content types, including visually-appealing photography and videos. He adheres to a number of best practices and tools, maintaining a steady cadence of content output, leveraging a strategic mix of content types and topics, and proactively engaging with other users.

Branson typically posts three times a day from his profile, which is actually much higher than is considered best-practice by many studies. The more widely-referenced optimal frequency is one to two posts per day , and any more could risk oversaturation and lead to less engagement.

Because Branson posts so frequently, diversity of content is important, and he frequently varies the format of his updates to keep things fresh and maintain audience interest and engagement. For example, just this past Friday, he posted a quote graphic, a photo with a link to an article, and a video:. Branson even considers variation within the post formats themselves. He balances personal promotion with outside points of view by switching between third-party sources and his own bespoke content, which keeps things fresh, authentic, and avoids being overly promotional.

By referencing or sharing articles he has written himself, Branson demonstrates his breadth of knowledge and further-establishes his credibility as a thought leader.

Likewise, he maintains more control over the information being shared with his followers. Branson uses this control over what information is shared on his page wisely by covering a wide variety of topics.

M4 X 25Mm Screw. Flywheel Bearing. Treadmill Parts. Accessories for the ProForm Ask a question. No questions have been asked yet. Ask our experts a question about this part and we will respond as soon as we can.

Join our VIP email list to receive money-saving-advice and special discounts. Model Number Recommended. Submit your question. Thank you for your question! Our experts will get back to you as soon as they can. Ask Another Question. Continue Shopping. Sign up. Continue Shopping Proceed to Checkout. Search within model. Page A. Add to Cart. M6 X Popular Parts. M8 Split Washer. M8 Nylon Locknut. Pulse Bar Screw. M4 X 25Mm Screw. M8 X 38Mm Bolt.

Exercise Bike Parts. Ask a question. No questions have been asked yet. Ask our experts a question about this part and we will respond as soon as we can.

ProForm is a world leader in home fitness equipment. But problems can arise. You can always use your treadmill, elliptical, bike, fusion or rower in manual mode. You may also experience the readout growing dim and becoming difficult to see while the machine is in operation.

For parts or not working. If not, ring our customer support phone number who can talk you through some diagnostics. When ordering replacement parts, have the model number, name and serial number of the bike, plus the part's key number and description. Copyright Policy You'll be able to manually adjust your settings, and your screen will display an oval racetrack as you work out. Attach the new console by plugging in the plastic jack to the console, or reconnecting the two plastic pieces and inserting the screws.

If you do not regularly clean and lubricate your gears, they can easily clog up and refuse to change resistance. The ProForm X-Bike is a bare-bones exercise bike designed to save floor space and money. Keep the exercise bike indoors, away from moisture and dust. If this does not solve the problem, the walking belt may need to be replaced. I read through some of the reviews on Costco.

If you find your magnetic resistance exercise bike not working, try these steps. I called their customer support and followed their suggestion to correct the problem but bike still did not work. Write the serial number in the space above for reference. Looking for an exercise bike? The lighter flywheels are effective for cardio training, toning and boosting your metabolic rate. Home of the official training bike of Le Tour de France , ProForm offers you the most realistic indoor cycling experience available.

If the console is causing the exercise bike tension control not working, then you have to replace the electric console or repair the existing one, which is best to be repaired or changed by a professional. Fourthly, an exercise bike might not change through the different resistance levels because of poor maintenance. Purchased the Proform Hybrid trainer and it worked well for about 3 years, when a weld on one of the pedal arms broke and the pedal was not useable recumbent bike.

The console controls the resistance and time of your workout, and fixing it immediately guarantees you will not be shorting yourself on calories you could be burning. We use cookies to give you the best possible experience on our website.

Go to next slide - Best Selling. Do not put the exercise bike … Sign In. Please see alternative selections displayed on the page. However, if the flywheel or the wheel gearbox is the cause of the magnetic resistance failure then you can easily replace them. COM do not endorse If you need to replace the wire harness, remove the upright support, which the wires travel through, by unscrewing the four screws on the frame at the base of the support.

Be sure the batteries are properly positioned inside the console. I have a Proform CR90 recumbent bike. Exercise bikes, whether it is recumbent bikes or upright bikes, are simple machines with straight forward technologies.

ProForm Exercise Bike slide touch 6. Use the exercise bike only as described in this manual. Calorie Monitor. When you change resistance on the console, you should hear the resistance motor. To do this, you will need the Allen wrench or Hex keys that were used during bike assembly. By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. Heart Rate Monitor. Leaf Group Ltd. Use the wrench to turn the right pedal counterclockwise a few turns until you have it loose, then hand-loosen until the pedal easily slides out of the pedal crank arm.

You can also check if there is. You can repair your stationary […] Proform provides treadmills, ellipticals, exercise bikes, hybrid trainers, and Tour de France series. If you can access the 2 wiring harnesses, try moving them in and out and making them slide up and down inside the upright. This upright bike features a large, easy-to-read LCD display and easy changes in difficulty thanks to electronic resistance buttons. Numerous emails and phone calls to icon fitness and still no luck with the last replacement part.

Get a more intense workout with an upright exercise bike. I privately contacted a tech, who came out and said it was a broken belt.

If you need to make repairs to your cycle, you should have easy access to places such as the console, seat, pedals and wires.

It positions you upright like a traditional stationary bike, and the unique frame can fold easily for storage. Proform display not working. Troubleshooting helps detect problems in the machine so that it can be repaired on time. Both of those drawbacks can be easily corrected. If this is important to you, this feature does not work. Another common problem is for the workout feedback to become inaccurate.

Without the heart monitor, these 2 programs are useless. ProForm bikes meet the exacting standards of distinguished cycling institutions, such as the Tour de France, allowing you to train harder and better at home. Simply push the Start button on your machine to begin a manual workout. The display will not light.

They will not, however, challenge elite athletes or support bulking up. Tighten down the bracket by turning the adjustment knob clockwise. Turn off the fitness device and unplug from the power supply if the console only shows zeros or the console buttons are not working. When using a ProForm elliptical, you may notice the electronic display console failing to turn on when powered up.

To fix this locate the speed sensor and use a hex wrench to pull it out. But, they don't. More elaborate exercise bikes may also provide information like a calorie monitor, LCD display, or heart rate monitor.

When peddling -- the display is not working. Get more answers from the people in your networks. Look for a difficult-to-read display or one that is displaying abnormal characters. Insert the right pedal and hand-tighten it clockwise approximately 10 turns, then use the adjustable wrench to tighten it until it is secure. Turn the device on and reset local fuses or circuit breakers if necessary; reset the circuit breaker switch on the base of the unit. Unplug the wires, which may resemble a phone jack that unplugs from the console, or you may see a wire with a plastic end coming out of the console and a wire with a plastic end coming up through the upright.

If you encounter an error with your ProForm elliptical trainer's console, turn the machine off and then turn it back on to see if the error continues.