Installing a halon system

That said, you can legally take your time making a replacement, but the EPA highly recommends choosing a more environmentally friendly substitute sooner rather than later.

Perhaps when the time comes to recharge your system, you could have a replacement fire suppression system installed in its place. At Kauffman Co. We can work with you to implement a solution that utilizes FM , an effective fire extinguishing agent with a low environmental impact. Even if your existing system must be modified or enlarged to accommodate the replacement, we can help you complete the entire process as effortlessly as possible.

To learn more about protecting your property from the destructive forces of a fire, please contact us today. We have years of experience providing fire suppression services to the Houston area. Maintaining fire alarm safety systems during building construction in Houston is critical to keeping workers and building occupants safe.

Posted on December 6, What Is Halon? I had a nice clear space on the aft bulkhead, which was just perfect. You may not be so lucky and may have to reroute wires or hoses if they are in the way. Mount the extinguisher as outlined in the instructions. Make sure they are tight. Install the manual release cable. Bear in mind that it is stiff, like a throttle or gear shift cable, and will not bend in a tight radius.

Cables are supplied in almost any length, so measure the run of the cable before ordering. An old piece of 6mm 1x19 rigging wire is handy for this, as it has the same bend characteristics as the release cable. After deciding where the cable will go, install the plate for the manual release, which should be near the helm. You will also need to drill a hole for the cable attachment; I was lucky to be able to use the plate to cover an unwanted hole where a gauge used to be mounted.

Then install the other components on the other side: barrel nut, O ring, T handle, and safety clip. Connect the other end of the cable to the cylinder, which is retained by a spring clip.

It is also worth noting that the cylinder has a safety pin in place that has to be removed, but leave that until you have completed the installation to avoid a possible accidental discharge. The panel is passed through the hole and secured by a straddle clip on the back.

Wiring is likely to be the most time-consuming part of the job, as it must be neat and well ordered. I put mine behind the breaker panel. The wiring is fairly easy to follow, but requires connections from the top of the cylinder, a power feed and connections to the electrical engine shut-down solenoid. When connecting a shut-down solenoid, be aware that the contacts will either be normally open or normally closed. You may need to refer to the engine wiring diagram to identify your specific application and which wire you need to splice into.

Install the CAT 5 Ethernet cable between the monitor panel and control box. Make the power connections to the fuse box, which must be protected with the correct amperage fuse. If there was ever any doubt the sailing public still enjoys making its way to Newport, Rhode Island, or Annapolis, Maryland, to see the latest in boat design, those doubts were put to rest After a year without boat shows, proved to be a blockbuster summer and fall for events around the globe, and the International Mulithull Show is looking to continue that trend in First held in , the show, which takes place in La Grand-Motte, France, on the shores Have you ever wondered how sailors navigated before GPS?

Do you want an analogue backup if your electronics fail? Are you just curious about navigating by the stars? This free, online course will cover celestial Imagine a sailboat under 60ft with private en suite accommodations for five couples plus professional crew. Add to that enough space to allow those same lucky guests their own private lounging areas outside. After a hiatus in , the annual end-of-year regatta more than lived up to its daunting reputation in with strong winds To subscribe for free and have it delivered directly to your inbox every weekday, click here.

The boats will visit 46 countries and archipelagos that are home to nearly indigenous Real Estate. A halon system is a type of gaseous fire suppression system which operates with halon gas.

In the s, halon was recognized as an ozone -depleting compound, and production of additional halon was largely banned. Today, installation of new halon systems is only allowed when people can demonstrate that they absolutely must have a halon system. Older existing systems are perfectly legal, although many government encourage people to consider decommissioning their halon systems and replacing them with a safer system, if possible.

Halon was introduced in the s as a form of gaseous fire suppression, and it also has a history of use as a refrigerant. In a halon system, pressurized tanks of the gas are connected to a series of pipes and nozzles. When a fire is detected, the gas is released. The halon gas interferes with the oxidation reaction between the fuel and the oxygen in the room which drives the fire, shutting the fire down.