Nt series support tool manual

Fixed the abnormal vibration problem of the game "Fire Emblem: ThreeHouses" on switch console. Fixed the abnormal vibration problem of "Crash Bandicoot N.

Fixed the abnormal vibration problem of Resident Evil Revelations 2 and Splatoon 2 on switch console. Added mode light: Dinput: blink once per cycle Xinput: blink twice per cycle Mac: blink three times per cycle Switch: blink four times per cycle PSC: blink five times per cycle 3. Fixed the bug that some WiiU Pro controller's buttons can't be recognized after bluetooth connection. Fixed the abnormal vibration problem of Crash Bandicoot on switch console. The dpad of wii controller map to left joystick.

Fixed the problem of no vibration for PS3 and Xbox Elite 2 controller. Fixed the abnormal vibration of some games on Switch console. Fixed the abnormal trigger problem of some games on Switch console eg. Monster Hunter Rise. Improved the stability of the controller connection. Supported 8BitDo Pro2 Bluetooth controller. Added support for DualSense Controller. Added vibration for DualSense controller. Added support for SN30 Pro for Android gamepad v2.

Added support for Arcade Stick v3. Added support for Xbox One bluetooth controller with the new firmware 4. Added support for Xbox Elite 2 controller.

Update instruction: 1. Click "Update" button and select firmware. Update the firmware of the retro receiver you have to its latest version v1. Press both PAIR buttons on the receiver and controller to sync them. Both LEDs on the receiver and controller will become solid when they are successfully paired. Fixed the issue of automatically pressing the button after bluetooth is disconnected.

N30 Wireless Mouse Manual. Firmware update instruction 1. Fixed the pop up error message for Amiibo on Switch mode. Manual FAQ Firmware v4. Enhanced the stability of the Bluetooth pairing. Fixed the latency issue with D-Input. Fixed the Turbo function issue. Fixed input lag problem when used with other controllers.

Support USB connecting with Switch. SN30 Pro Manual Firmware v1. Added USB connection to Mac mode. Fixed the bug that the controller would not turn on occasionally. Fixed the crashing issue of the controller when charging. It will disconnect from bluetooth connection when using USB connection.

Added sleep mode to the controller during its Bluetooth connection. Changed the Turbo speed when used to 20FPS. Added vibration function to the controller when it is on X-input mode. Enjoy excellent functionality with a range of cars, SUVs, minivans, and light duty trucks sold worldwide. Overall, the Foxwell NT car scanner is a truly versatile tool that will provide comprehensive support for the majority of diagnostic and vehicle servicing requirements.

An excellent OBD2 scanner is always an asset, and the NT Elite is able to deliver all 10 standard test modes to ensure that car maintenance is effortless. It requests and records live data in order to delivered detailed systems diagnosis.

Retrieving ECU information and transmission diagnosis is all possible, too. The Foxwell NT does come at a premium price point, and does not support injector coding functions. However, the device does include an excellent range of services, to help keep your cars or SUVs in excellent condition. Issues with your headlights, air conditioning, or ESP will be easily resolved too. The NT is also able to read a range of manufacturer protocols, for specialized servicing. It boasts a sturdy outer case for staying safe in the workshop, and the high quality full color screen makes reading graphs and running a full system test much more enjoyable.

A 1 year warranty is a great extra addition. For a premium cost, the Foxwell NT delivers premium compatibility and comprehensive car diagnostic and maintenance services. The intuitive interface makes it accessible to all experience levels, whilst the sturdy and compact design is ideal for on-the-go use.

The lack of injector coding and programming functions may be a drawback for some users, but this is an ideal choice for anyone who wants to perform reliable diagnostics on a broad range of makes and models. Trying to find the right OBD2 scanner for you can be tricky. Foxwell consistently deliver great quality scan tools, so you may be unsure which choice is the best for you.

Also look for a product that covers the majority of usual error codes and manufacturer protocols. Page Example Screen Configuration Example Screen Configuration Section Example Screen Configuration The configuration and screen transfer of the example screens you are going to create are described below. Page Display when L is ON.

Display when L is OFF. When you touch the numeral display area, numeric keys are displayed pop-up window , allowing you to input the data.

If any of the allocated bits goes ON, the corresponding alarm message is dis- played. When you touch the alarm message, the corrective action and details of the alarm are displayed in the alarm content display area. When you touch this button, the screen switches to the Set Screen screen No. Required environment The required hardware environment for the creation of the example screens is shown below. Page Create new screen screen No. Refer to Starting-up and Exiting the Support Tool.

Page Setting Memory Tables After setting the PT configuration items as indicated above, click on Setting Memory Tables Set the memory tables numeral memory table, character string memory table string table , and bit memory table.

Refer to Section 7 Memory Table Setting. Opening a table 1 Select [Tools] menu bar [Table]. Page Creating the Sample Data Section 2 Make the character string memory table settings as shown below. Display the data creation window for screen No. Setting the screen properties 1 Select [Screen] menu bar [Properties]. Page [Text] Refer to Text. Refer to Touch Switches. Position —— Page [Paste].

Refer to Creating a New Screen. Page Creating the Sample Data Section 6 Click the mouse with the mouse cursor set at the position where the nu- meral display field is to be displayed at the intended upper left corner of numeral display.

Refer to Trend Graph. S Setting the graph line 4 Double click the [Settings] tab and click on Set the line 1 properties as shown below. Page 7 Specify the trend graph and select [Edit] menu bar [Select Object]. Page , returns to lamp property then click on again. Page For methods of specifying an element consisting of multiple elements, refer to Selecting an Element. Page 5 Close the image editor.

Reference: It is possible to copy image data FE20 onto FE21 on the image table so that it can be reused. Page [Graph] [Bar Graph].

Refer to Bar Graph. Click on , returns to touch switch property then click on again. Refer to Overlap- ping Screens. Page 1 Select [Screen] menu bar [New]. Page S Setting the cursor moving touch switch 9 Double click on the touch switch area dotted line frame created at the numeral input field position and set the properties as shown below.

If selection of the touch switch is not easy, choose [Select Object] from the [Edit] menu and select the touch switch from the list. Page [Data Input] [Thumbwheel Switch].

Refer to Thumbwheel Switch. General Position —— Page S Creating the [Stop] button 8 Copy the [Start] button and paste it on the data creation screen. Page 5 Select [Objects] menu bar [String Display]. After completing the setting, go to the next step without clicking on button. S Setting the label of [Auto] button 4 Press in the general property of a touch switch and set the la- bel properties as shown below. Page S Creating the [Man. After that, click on any position in the screen other than the alarm list to cancel the alarm list selected state edit state.

Only the position can be adjusted. Page Creating The Alarm List Library Data 3 Click the library creation area frame dotted lines that is displayed at the upper left area in the library creation screen and drag the point at the lower right corner. The mouse cursor position is displayed under the screen; Reference: It is possible to copy library data FA20 to other code so that it can be reused.

Fol- low the procedure below. Specify FA20 and select [Copy] by pressing button. Page Creating the screen numeric keys S Creating the [0] key frame 1 Select [Objects] menu bar [Touch Switch] 2 Create the outline of the [0] key by dragging the mouse on the data cre- ation screen. Page It is also possible to select a mark by pressing button in the label property.

For other keys, the label size should not be modified. Page Downloading of the screen data starts. During screen data download, the screen as shown below is displayed. To switch the graphic dis- 1 [Tools] [Library Editor] or [Tools] Page 3 [Window] [Symbol Manager] Read the registered data. Screen To display a blank screen Specify screen No. Page Create the [ ] and [ ] touch switches. Page [Objects] [String Display] data Create a character string display element.

Page Refer to Image To modify the size of an 1 Specify the area of an image data to be shrunk or ex- image data panded on the image editor.

Page 1 [Objects]—[Touch Switch]Create a touch switch for switch input according to which interlock is set. Page time data to display the time. To set the time to be displayed 1 [Objects] [Data Input] [Numeral] Set the time to be written to a numeral memory table entry.

The screen data should be saved in mmi format. To display calculated numeric value [Tool]—[Mathematical Table] With some models of PT, it is necessary to disconnect from the host before connecting the Support Tool.

Note If the vendor manufacturer of the PLC you are using and the PLC ven- dor setting of the created screen data is different, transmission is not pos- sible. The type of data that can be sent is indicated in the table below. Therefore, make sure that the existing data in the PT is backed up by the If the PT is not in the Transmit mode, a timeout error occurs in about 10 se- conds at the Support Tool.

In this case, set the PT in the Transmit mode and click on in the error message dialog box. Page Receiving Uploading Data Otherwise the system may operate unpredictably.

The type of data that can be received is indicated in the table below. Page The mathematical table will be transmitted only when application transmission is performed. Therefore, make sure that the edit data is saved in a file before executing data receiving from the PT to the Support Tool.

Page Data receiving starts when clicked. Page Receiving Uploading The History Record Since the file is described in a special format, the contents cannot be read using Windows general application tools. Reference: The history record data file. Page Report Types Screen image, setting data, etc.

The screen image can be output to a file in bit map format using the [Screen] menu bar [Copy to Image]. Refer to Outputting the Screen Image. Page Cross-References Section Cross-References The use statuses of memory tables such as the numeral memory table and char- acter string memory table string table are printed or displayed. The cross-reference allows you to find the screens where a specific memory This report is available only when the direct connection setting data has been set.

Page History Report By specifying the display history record file or the alarm history record file, sent from a PT, the history record data can be printed or displayed.

When it occurs, please select [Start] — Page Screen List Section Reference: It is possible to save each screen image to a bit map file. In this case, open the screen to be saved and select [Screen] — [Copy to Image]. Page Validation Report The setting contents of memory tables are printed or displayed. The contents to be printed or displayed are the same as in the error display dialog box. Page Printing Reports Printer Setting To print a report using a printer, it is necessary to set the type of printer and print mode.

To set the printer information, display the Print Setup property by selecting [File] menu bar [Print Setup]. Page Output To A Printer Portrait: Specify this item if the data is to be printed parallel to the short- er dimension of the paper. Landscape: Specify this item if the data is to be printed parallel to the longer dimension of the paper.

Page Specify this item to attach the footer. Page Show Dotted Line Frame: Specify this item when you want to include the dotted line frame for the following objects. S Dotted line frame indicating the position of To select the item to be printed as a header or a footer, move the cursor to the Page Output To A File Rtf The operation for outputting the reports to a file is basically the same as that for printing them. Reference: The rich text format is a file format used for document data; in this file format, in- formation such as characters and indents is retained.

The procedure for displaying the print image is basically the same as that for out- putting the report to a printer. The output data can be used in other applications to be displayed or printed. The operation procedure for outputting the screen image is shown below. Page Reference: The screen image of the editing screen is saved in the bit map file without change. Please refer to the information that you need. A Data Conversion The direct access types that can be handled by the Support Tool Ver.

Page PT model. Page PT models. First, change either of them and then perform conversion a second time. Page In this case, check if the system pro- gram installed in the PT is Ver3. Page However, if the data of a new model is registered for the screen of a conven- tional model using the symbol manager, the following points must be taken into consideration due to differences in the usable PC PLC address range between a conventional and a new model.

Page Properties. Correction related to continuous screens When the data of a conventional model is converted into data for a new model, an error may occur due to differences in the handling of continuous screens be- tween conventional models and new models. S Difference Page Correction related to the system initializing screen Host Connect screen When the system initializing screen is converted, conversion is executed as shown below due to differences in screen numbers and elements that can be registered between conventional and new models.

Page PT. Correction related to the number of memory tables Since the number of entries that can be used in the memory tables depend on the PT model, conversion is executed in the manner shown below. S Difference NT Page existence of A to F other than F at the most significant bit position is written to an allocated word in the host differs between a conventional and a new model.

Correction of library codes When a library code is converted between a conventional and a new model, con- version is executed in the manner shown below due to differences in the library codes between them. Page standard. Correction of smoothing processing for marks If a mark is converted between a conventional and a new model, conversion is executed in the manner shown below due to differences in the handling of mark smoothing processing between them.

Page Correction related to the touch switch for which the copy function is set If a touch switch assigned the copy function is converted between a conventional and a new model, conversion is executed in the manner shown below due to dif- ferences in the range of numeric values that can be input. Page Label Type — Static not supported. Label will be set to default. Label will be set to Off Description. Off label — two or Label Type — Page Switch.

Correction related the reference memory table entries for numeral input In the conversion of the data between a conventional and a new model, conver- sion is executed in the manner shown below due to differences in the numeral memory table entries that can be referred to.

Page Correction related the number of digits for numeral display In the conversion of the data between a conventional and a new model, conver- sion is executed in the manner shown below due to differences in the range of numeric values that can be displayed.

Page V2. Page is not sup- ing device ported monitor screen In the case of Bit Memory Table, it will be reset based on the following table. Page S Click on the button in the upper right section of the main window. S Double click on the system installer icon in the upper left section of the main window.

S Click on the system installer icon in the upper left section of the main window, then select [Close] in the control menu box. Basi- cally, execute the processing for deleting the system program, then that for setting the PT in the state in which it waits for the reception of the system program. For details, refer to the manual for your PT. Page 6 At the completion of system program installation, the corresponding mes- sage is displayed.

Read the message and click on 7 At the PT, press the touch switch that acknowledges the end of system pro- gram installation.

The PT re-starts by the installed system program. So it is useful when you save the file in a floppy disk to transfer the data to and from a PT on site. NT Transfer utility operates alone. You do not need to pre-install the Support Tool in the personal computer. After specifying the destination, click on The screen for specifying the destination for registering the start menu is dis- played. Page If you want to change the folder, select the desired folder from the Existing Folders or directly input the folder name.

After specifying the folder, click on Installation of the specified programs is implemented; Page S Click on at the upper right area of the main window. S Click on the NT Transfer Utility icon at the upper left area of the main window and select [Close] from the displayed control menu box. Page The screen data file saved in mmi format is sent downloaded to a PT. Application Window The name of each part and the available functions are described below.

Page Copy source text into the editor Accept changes. Enabled only when contents are changed. Status Bar The status bar, which you can find at the bottom of the translation window, is di- vided into four panes.

About — Displays the version number. Page A File Open dialog box is a window that is displayed in a fixed size. To Open a. The File Open Dialog box will be displayed so that the user can select the. MMI file that will be opened.

Page This option is used to display translation settings such as language, character set, database file, source file, output file name of the source file, and the target file.

You can also use this setting to change the output file name of the target lan- guage. Page Deletes the selected Language column. Select [Delete] in the [Translation] Menu of the Application window. This option will only be enabled if there is at least one target language translation data present. The Delete Translation Dialog box will be displayed.

Page Click the Button after selecting the language to be exported. A file save dialog box similar to the file open dialog box will prompt you to enter a filename. Once a valid filename is specified, the export operation begins. The cursor will change to a wait cursor for the duration of this operation. Page Import translation data for all the languages in the Language list box i. By doing this, translation data for all languages is processed and imported. Page MMI for the target languages if any.

Refer to the message below. Page 7 Italian 8 Spanish S Character set A character set is an ordered set of characters in which a numeric index code- point value is associated with each character.

Different languages and locales may be used in different character sets. The user can easily reopen the file by selecting it from recent file list. Page Translation Support Utility Appendix D S Click the Support Tool icon displayed in the upper left section in the main win- dow, then select in the control menu box.

S Press the F4 key while holding down the Alt key. Some functions can be set at the PT side even if they cannot be set by the Support Tool. The Backlight OFF function is only for turning off the screen or the backlight. Printing Data The Print Data function is used to print test results through computer.

To print test results: 1. Activate the application by clicking the Print Button from the menu. It also allows the users to edit the text by moving the 7. Visited 1, times, 2 visits today. Related posts: Foxwell NT Plus vs. Foxwell NT Update!